ページを印刷するDOGGING (PANIC EXIT DEVICES ONLY)
DOGGING ACTIVATION
Cylinder Key
Depress push bar and turn flat/hex key or
cylinder key one full turn for dogging check.
Flat Tool/ or Hex Key
CYLINDER DOGGING INSTALLATION
If cylinder is not installed, remove cover plate and install
cylinder with cam orientation as shown below.
Cam
Hinge
Side
BOTTOM VIEW
Install cylinder to the cover plate with
the cam facing towards the hinges.
For Alarm (AL) or Latch Monitoring (LM) panel installations,
follow the instructions supplied with those porducts.
11 / 12
Cylinder
Cover Plate
Cylinder
Locating
whasher
Cylinder
Lock Nut
Slide cover in
to position on
the rail.