- ページ 19

マザーボード Asus AT3GC-I NA SIのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Asus AT3GC-I NA SI 38 ページ。 Motherboard - mini itx

USB connectors (10-1 pin USB56, USB78)

These connectors are for USB 2.0 ports. Connect the USB module cable to any of

these connectors, then install the module to a slot opening at the back of the system

chassis. These USB connectors comply with the USB 2.0 specification that supports up

to 480Mbps connection speed.

AT3GC-I USB2.0 connectors

Never connect a 1394 cable to the USB connectors. Doing so will damage the

motherboard!

The USB 2.0 module is purchased separately.

Chassis fan connectors (3-pin CHA_FAN)

This fan connector supports cooling fans of 350mA~740mA (8.88W max.) at +12V.

Connect the fan cable to the fan connector on the motherboard, ensuring that the black

wire of the cable matches the ground pin of the connector.

DO NOT forget to connect the fan cable to the fan connector. Insufficient air flow inside

the system may damage the motherboard components. It is not a jumper! DO NOT place

jumper cap on the fan connector.

AT3GC-I fan connectors

ASUS AT3GC-I

USB56

PIN 1

USB78

PIN 1

CHA_FAN

GND

+12V

Rotation

1-10