- ページ 21

ソフトウェア Canon S 530DのPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Canon S 530D 45 ページ。 Canon bjc-s530d: setup instruction
Canon S 530D にも：パンフレット＆スペック (2 ページ), ここからスタート (2 ページ)

ページを印刷する

6.7.3. Exclusive processes in host computer memory card access and Memory Card Direct Printing

Writing of data from the host computer to the memory card, while reading of image data from the memory

card for direct printing is conducted as follows in order to avoid overwriting the image being printed in

Memory Card Direct Printing, via the host computer.

When direct printing from the memory card:

Writing data from the host computer to the memory card is not possible. (Reading of data is possible.)

An error is displayed in the host computer at the start of data writing operations.

When writing data from the host computer to the memory card*:

Direct printing from the memory card is not possible. Even if the print start key is pressed, printing will

not start.

*From the time the host computer sends writing commands until a fixed period of time after the last

writing command.

Note: In order to perform direct printing after writing data from the computer is completed, the memory

card must be removed, and reinserted.

6.8 Operations in the Operation Panel

6.8.1. Print button

When this button is pressed, Memory Card Direct Printing starts. An LED installed inside the button blinks

during printing. The button is also used to select setting values while in maintenance mode.

6.8.2. Cancel button

When this button is pressed during Memory Card Direct Printing, printing stops. The button is also used to

reset the Memory Card Direct Printing settings to the default of each mode. (The button is invalid when

pressed during printing from the host computer or Digital Camera Direct Printing.)

6.8.3. Cursor buttons

Pressing the vertical cursor buttons moves the cursor at both ends of the LCD.

Pressing the horizontal cursor buttons alters the setting values of each item.

For the photo number and the number of copies, the left button decreases the number, and the right button

increases the number.