コントロールユニット bolid S2000-SP4/220のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。bolid S2000-SP4/220 7 ページ。 Addressable executive module
ページを印刷する1.1
General
1.1.1 This Instruction Manual describes S2000-SP4/220 Addressable Executive Module along
with its operation algorithms and characteristics.
1.1.2 The module is used as part of a multipart executive device in fire and intrusion alarm
systems under control of an S2000-KDL ver.2.01+ or S2000-KDL-2I ver.1.00+ controller and an
S2000M console.
1.1.3 Meeting requirements for sound and light indication of control and indicating equipment
is provided together with the S2000-KDL and S2000M.
1.1.4 The module is designed to monitor and control fire dampers, smoke control dampers,
deluge valves, and other executive devices powered by mains power 220 V.
1.1.5 The module is to be attached at a suitable place (on a wall, above a suspended ceiling, or
on another constructions near the connected executive device) protected against atmospheric
fallouts, mechanical damage, and unauthorized access. The module is designed for round-the-clock
operation.
1.1.6 The module must not be used in aggressive medium or dust condition, or in explosion-
hazardous premises.
1.1
Specifications
1) Input Voltage
2) Insulating Voltage of the Polling Loop
and Executive Part
3) Consumed Current:
4) Outputs
5) Max Switching Current per an Output
6) Switching Voltage
7) Circuit Control Current
8) Monitored Limit Switches
9) Pre-Operation Time
10) Operating Temperatures
11) Humidity
12) Overall Dimensions
13) Weight
14) Ingress Protection Rating
ADDRESSABLE EXECUTIVE MODULE
S2000-SP4/220 Ver 1.04
INSTRUCTION MANUAL
1 TECHNICAL DATA
Communication Part
Executive Part
Communication Part
Executive Part
– 8 V to 12 V via the polling loop
– An external power supply, 220 V ac
– Up to 500 V
– 1.5 mА max
– 50 mА max(without regard to output's current)
– 2
– 3 А
– 220 V
– 0.5 mА max
– 2
– 15 s max
– Minus 30°C to +55°С
– 93 % at +40°С
– 156 mm × 107 mm × 39 mm
– 0.2 kg max
– IP20
– IP30, if wall mounted
Table 1. Specifications
1