- ページ 21
プロジェクター Canon LV S3 - SVGA LCD ProjectorのPDF 仕様をオンラインで閲覧またはダウンロードできます。Canon LV S3 - SVGA LCD Projector 21 ページ。 Svga & xga models
Canon LV S3 - SVGA LCD Projector にも： 組立・設置マニュアル (4 ページ), パンフレット＆スペック (2 ページ)
ページを印刷する
8.7 Temp Read Command
"CR6•h[CR]
Command
Get the temperature inside a projector.
Detail
When some temperature sensors are installed in the projector, it is possible to
know the temperature all at once.
Acceptable
Response
%1, %2
Unacceptable
•g%1_%2_%3 •h[CR]
%1••Temperature, sensor 1
%2••Temperature, sensor 2
%3••Temperature, sensor 3
Temperature data form shows as 00.0.
When the temperature sinks to -, the first character is "-" like
"-05.5" [CR].
When cannot return the temperature data due to hardware
problems, the first character is "E" like"E00.0"[CR].
When the status is Stand BY or it is 10 seconds after Power
On, depend on projectors, temperature may approach critical
temperature due to ballast lamp's residual heat. So, when
the status is Stand By or it is 10 seconds after Power On, the
process for the abnormal temperature is not executed.
temperature data is " ----" at the time.
When some temperature sensors are installed, the projector
sends command continuously.
"_31.5__35.2__33.4" [CR]
There is the first sensor's information, and after one space,
there is the second sensor's information.
"?" [CR]
The
Page
21/21