- ページ 27
プロジェクター Canon LV-5200のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Canon LV-5200 48 ページ。 Canon lv-5200: user guide
Canon LV-5200 にも： パンフレット＆スペック (2 ページ)
ページを印刷する
Display area
Selects the area displayed with this projector. Select the resolution
at the display area dialog box.
Display area H
Adjustment of the horizontal area displayed with this projector. Press
the POINT LEFT/RIGHT button(s) to decrease/increase the value.
Display area V
Adjustment of the vertical area displayed with this projector. Press
the POINT LEFT/RIGHT button(s) to decrease/increase the value.
Full screen
Press the POINT LEFT/RIGHT button(s) to turn the Full screen
function "On" or "Off." Set "On" to resize the image with 4 x 3 aspect
ratio to fit the screen.
NOTE : Full screen cannot be selected after Display area, Display
area H, and Display area V are adjusted.
3
Store
To store the adjustment parameters, move the red frame pointer
to the Store icon and then press the SET button. Move the red
arrow pointer to any of Mode 1 to 5 that you want to store and
then press the SET button.
Mode free
To clear the adjustment parameters previously set, move the red
frame pointer to the Mode free icon and then the SET button.
Move the red arrow pointer to the Mode that you want to clear
and then press the SET button.
Other icons operate as follows.
Reset
Reset all adjustment parameters on the adjustment dialog box to
the previous figure.
Quit
Closes the PC ADJUST Menu.
NOTE
G Fine sync, Total dots, Display area (H/V) and Full screen cannot be
adjusted when "1035i (HDTV)" or "1080i (HDTV)" is selected on PC
SYSTEM Menu (P23).
COMPUTER INPUT
Press the SET button at the
Display area icon and the
display area dialog box appears.
Press the POINT LEFT
/RIGHT button(s) to
adjust the value.
To store the adjustment data.
This Mode has parameters being stored.
Vacant Mode
Shows the values of "Total dots,"
"Horizontal," "Vertical," "Display
area H," and "Display area V."
To clear the adjustment data.
Display area
Close this dialog box.
27