- ページ 11
プロジェクター Canon LV-5220 - Multimedia Projector SVGAのPDF 機能仕様をオンラインで閲覧またはダウンロードできます。Canon LV-5220 - Multimedia Projector SVGA 42 ページ。 Multimedia projectors
Canon LV-5220 - Multimedia Projector SVGA にも： 機能仕様 (20 ページ), 仕様 (6 ページ)
ページを印刷する
Expand Serial Command Functional Specification
6.8. Setting Status Read Command Table
CR_TERMINAL [CR]
Status read command
7. Error Code Table
Error Code
?
000
101
102
103
201
301
302
303
402
Note) this error code for Expand Command, not applicable for Basic Command.
Read Blue Back setting
Read Display setting
Read Logo setting
Read selected Remote Code
Read selected Language
Read On Start setting status
Read Power Management setting status
Read the start time for Power Management
Read selected FAN Control Speed
Read RC/KEY Prohibit status
Read Terminal setting status
Read Standby mode setting status
Read Pointer setting status
Read Auto Setup setting status
Read selected Fan mode
Read the status if there is signal or no signal
Read No Show setting status
Read Freeze setting status
Read P-Timer operational status
Read if sensors are exceeding critical temperature or not
Read the temperature when sensors approached critical
temperature
When receives data that cannot be decoded.
Parameter determination error. (Digit number error, and
incorrect letter included)
Normal Reception. (Not error)
The function is not available in the selected Mode.
Selected the value is out of range. (Selected value will not be
reflected)
Command mismatched to the Hardware. (Command for
unpopulated option function)
When sending command, the increment is maximum value or
the decrement is minimum value.
Processing image capture. Re-try it again later.
Processing Auto setup, not executable.
Re-try it again later.
Processing Memory Card Viewer. Re-try it again later.
Processing PIN Code, not executable.
Re-try it again later.
Item
Item
Content
Page 10 of 41