- ページ 17
プロジェクター Canon LV-5220 - Multimedia Projector SVGAのPDF 機能仕様をオンラインで閲覧またはダウンロードできます。Canon LV-5220 - Multimedia Projector SVGA 42 ページ。 Multimedia projectors
Canon LV-5220 - Multimedia Projector SVGA にも： 機能仕様 (20 ページ), 仕様 (6 ページ)
ページを印刷する
Expand Serial Command Functional Specification
8.5.5. CF_V-POS Command
Command
"CF_V-POS_%1" [CR]
"0000 – nnnn" ----------- Directly set Vertical Position setting value
%1
"UP" ---------------------- Vertical Position setting value +1
"DN" -------------------- Vertical Position setting value –1
Set Vertical Position PC signal.
(When it is in usual Power On state, this is valid)
Details
The value set by the command will not be saved to the Projector.
Therefore, when AC Power Off the Projector, the value will return to the original
setting. (For Standby mode, this value stays)
Acceptable
Response
Unacceptable
8.5.6. CF_DDOTS Command
Command
"CF_DDOTS_%1" [CR]
"0100 – nnnn" --------- Directly set Display Dots setting value
%1
"UP" ---------------------- Display Dots setting value +1
"DN" ---------------------- Display Dots setting value –1
Set Display Dots PC signal.
(When it is in usual Power On state, this is valid)
Details
The value set by the command will not be saved to the Projector.
Therefore, when AC Power Off the Projector, the value will return to the original
setting. (For Standby mode, this value stays)
Acceptable
Response
Unacceptable
8.5.7. CF_DLINE Command
Command
"CF_DLINE_%1" [CR]
"0100 – nnnn" --------- Directly set Display Line setting value
%1
"UP" ---------------------- Display Line setting value +1
"DN" ---------------------- Display Line setting value –1
Set Display Line PC signal.
(When it is in usual Power On state, this is valid)
Details
The value set by the command will not be saved to the Projector.
Therefore, when AC Power Off the Projector, the value will return to the original
setting. (For Standby mode, this value stays)
Acceptable
Response
Unacceptable
"nnnn" is maximum value. This is current Total Line
value - Display Line value.
"000" [CR]
"101" [CR] ---- Input is Video
"nnnn" is maximum value. This is current Total Dots value
– Horizontal Position value.
"000" [CR]
"101" [CR] ---- Input is Video
"nnnn" is maximum value. This is current Total Line value
– Vertical Position value.
"000" [CR]
"101" [CR] ---- Input is Video
Page 16 of 41