- ページ 22

プロジェクター Canon LV-7350のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Canon LV-7350 48 ページ。 Canon owner's manual multimedia projector lv-7355 lv-7350
Canon LV-7350 にも：パンフレット＆スペック (2 ページ)

ページを印刷する

COMPUTER INPUT

DIRECT OPERATION

Choose Computer by pressing INPUT button on Top Control or on

Remote Control Unit.

If projector cannot reproduce proper image, select correct input source

through MENU OPERATION (see below).

MENU OPERATION

Press MENU button and ON-SCREEN MENU will appear. Press

POINT LEFT/RIGHT button to move a red frame pointer to

INPUT Menu icon.

Press POINT DOWN button to move a red arrow pointer to

either Computer 1 or Computer 2 and then press SET button.

Source Select Menu will appear when you select Computer 2.

Move a pointer to either RGB (Digital) or RGB (Analog) and then

press SET button.

RGB (Digital)

RGB (Analog)

This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA, or SXGA (refer to

"COMPATIBLE COMPUTER SPECIFICATIONS" on page 23). When selecting Computer, this projector automatically tunes

to incoming signal and projects proper image without any special setting. (Some computers need setting manually.)

Note : Projector may display one of the following messages.

When the projector cannot recognize the connected

Auto

signal as PC system provided in this projector, Auto PC

Adjustment function operates to adjust the projector and

the message "Auto" is displayed on SYSTEM Menu icon.

(Refer to P24.) When image is not provided properly,

manual adjustment is required. (Refer to P25 and 26.)

There is no signal input from computer. Make sure the

––––

connection of your computer and projector is set

correctly.

(Refer to TROUBLESHOOTING on page 41.)

SELECT COMPUTER SYSTEM MANUALLY

This projector automatically selects PC system among those provided

in this projector and PC system can be also selected manually.

Press MENU button and ON-SCREEN MENU will appear. Press

POINT LEFT/RIGHT buttons to move a red frame pointer to PC

SYSTEM Menu icon.

Press POINT DOWN button to move a red arrow pointer to the

system that you want to set, and then press SET button.

SELECTING INPUT SOURCE

When the input source is digital, select RGB

(Digital).

When the input source is analog, select RGB

(Analog).

SELECTING COMPUTER SYSTEM

INPUT button

Computer 1

Computer 2

Video

INPUT MENU

INPUT Menu icon

Move the pointer (red

arrow) to Computer and

press SET button.

Computer

Source Select Menu

Move the pointer to RGB

(Digital) or RGB (Analog)

and press SET button.

PC SYSTEM MENU

SYSTEM Menu icon

Displays system being

selected.

PC SYSTEM MENU

SYSTEM Menu icon

Displays system being selected.

The systems on this dialog box

can be selected.

Custom Mode (1~5) set in PC

ADJUST Menu. (P25, 26)