バッテリーチャージャー Akyga AK-BC-01のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Akyga AK-BC-01 4 ページ。 Microprocessor battery charger
ページを印刷する
AK-BC-01 - user manual
>80
%
Short description of the product
The Akyga® AK-BC-01 microprocessor battery charger is used to simultaneous charging of up to 4
batteries with individual control of each cell The battery charger is compatible with Ni-MH AA (R6) and
AAA (R03) batteries. It has multifunctional LCD display which shows the status of each battery
separately and warns about placing the batteries in wrong polarity. It has also a set of protectors OVP,
OTP, OPP, SCP, OCP and additional safeguards to protect against: improper placement of the battery in
the charger, overcharging of the battery, overheating of the cells (60°C), placement of damaged or
incorrect cells and effects of short-circuit and overload.
The product is adapted to supply voltage in the range of 100-240V, 50/60Hz.
The power consumption of charging battery can not exceed the charger nominal current.
The product is compatible with the applicable national and European requirements.
What is in the box?
- AK-BC-01 battery charger
- Power cord
Symbols explanation:
There is a particular danger connected with service.
There is a risk of losing health or life (e.g. by electic shock).
Important tips and information.
The CE standard description on the product is the manufacturer's declaration that the marked
product meets the requirements of the directive so-called The "New Approach" of the European
Union (EU). For security and certification (CE) reasons, the device can not be rebuild or change in
any way. In the reason of using the power supply for other purposes than those described, the
product may be demaged. The incorrect use may also cause hazard such as short-circuits,
burns, electric shocks, etc. Read the users manual carefully and keep it for later use. The product
could be share to third partie only with the user manual included.
Product accordance with the EU directive 2002/96/EC. The symbol of the crossed out basket
placed on the product means that the marked product can not be disposed of with other
household waste. After use, the product must be return to collection point for used electical and
electronic equipment or to the seller. Appropriate segregation of rubbish for subsequent
processing, recovery or descrution contributes to avoiding negative effects on the environment
and health, and also allows the recovery of raw materials from which the product is made.
The RoHS mark on the product is the manufacturer's declaration that the marked product meets
the requirements of the EU Restriction of Hazardous Substances (2002/95/EC) directive, which
aims to reduce the amount of hazardous substances penetrating into the environment from
electrical and electronic waste.
EC
BOX
GREEN
Ecological Solutions
.
www.akyga.com
p. 1