- ページ 4

錠前 Dorma CL860のPDF インストレーション・インストラクションをオンラインで閲覧またはダウンロードできます。Dorma CL860 4 ページ。 Cl800 series cylindrical lever lock.

TROUBLINGSHOOTING

Problem

1. Lever catch not engaging.

Lock may not be centered

or door is too thick.

Levers pull off

2. Cylinder retainer not flush.

3. Non-standard sized cylinder.

4. Outside rose located improperly.

1. Key orientation incorrect.

Unable to assemble

2. Outside rose located improperly.

outside lever

1. Tailpiece installed in wrong

Outside lever

orientation.

removable without

2. Wrong tailpiece. See tailpiece chart.

using key

1. Incorrect retractor/latch engagement

or alignment.

Latch won't retract

2. Poor door preparation or misaligment

thru-bolts.

1. Lever catch not fully engaged.

Key binds in lock

2. Check for proper tailpiece.

See tailpiece chart

Key cannot be removed

1. Wrong tailpiece aligment.

from cylinder

CL860, CL870, CL872, CL877 Functions Only

Lever retracts latch in

1. Incorrect installation of cylinder.

one direction, but not other

Solution

NOTES:

PAGE 4