ページを印刷する
AK-EC-07 - user manual
The II protection class device. It provides protection against electric shock against direct and
indirect contact, and thanks to the additional isolation it is not necessary to connect the device
case with the protective earth conductor.
Safety Precautions
WARNING! Product heats up during operation. To reduce the risk of burns or overheating the EV
charger, do not place it in restricted ventilation area. Also, do not allow the working EV charger to touch
soft surface such as pillows, blankets or clothing. The EV charger meets the limits on the surface
temperatures available to the user, as defined in the International Standard for Safety of Information
Technology Equipment (IEC 60950).
The manufacturer of the product is not responsible for damage or insults caused in effect
of disobey the safety instructions and informations contained in these user manual.
Keep the product and the packaging out of range of children and animals. The package
ź
includes a foil that child could choke while playing.
It is forbidden to apply the mechanical load to the product - strong shocks, impacts, dropping or
ź
crushing may cause its damage.
The product operation in adverse conditions is not allowed. Adverse conditions are primarily:
ź
exposure to direct sunlight, high or very low ambient temperatures, strong vibrations, high
humidity, surrounds of gases, dusts or flammable and aggressive liquids.
If the product has been damaged, does not work properly or has been stored for a long period
ź
of time in bad or unfavorable conditions, safe operation of the device is not possible. It is
essential to stop using the product and to protect it against re-use for security purposes.
It is forbidden to insert wet plugs into electrical outlet and the car charging port.
ź
If it rains during charging - do not let water get into the power socket and car charging port. If the
ź
plugs got wet - disconnect the mains fuse before pulling them out of the sockets or, if you can
not do this, first disconnect the plug from the power socket and then from the car charging port.
Product and power cord should not be touched with moist or wet hands under no
ź
circumstances.
Short-circuiting the current connection is prohibited.
ź
Make sure that the power cord is not crushed, bent, twisted, rubbed against sharp edges or
ź
mechanically loaded in any other way. Avoid thermal load of the cable - in particular keep away
from heat sources (such as stoves, radiators, fireplaces).
To avoid the risk of fire or electric shock - connect the device to an electrical outlet with
ź
increased resistance above 16 A with ground and protected by a 20 A circuit breaker.
It is forbidden to connect the EV charger to damaged and ungrounded sockets.
ź
Store the EV charger cable freely so that the cord does not break.
ź
Power cords should be laid in such a way as to eliminate the risk of stumbling or hooking over.
ź
Its forbidden to modify the power cord. In the case of modifications, the cable may be
ź
damaged, causing threats to life, health and property.
Connection of
ź
cigarette lighter plug to corresponding socket in your vehicle.
The charger is connected to the power supply by plugging in a German-type plug (Schuko) into
ź
the corresponding F-type socket.
Before connecting the EV charger to the socket, make sure that the voltage specified on the
ź
charger
matches voltage supplied to the electrical outlet.
Take into account the user's manuals for other devices conected to the charger.
ź
Mains plug should be disconnected from power socket if the product is not in use for a long
ź
time.
When disconnecting the power cord from the socket and from the device, do not pull on the
ź
cord, but only on the part of the cable plug provided for this purpose.
EV charger
(AC adapter) to electricity is made by plugging the cable with the
EV
p. 2