ページを印刷する
Mortise Exit Devices
S982
Olympian 300 Series - Handed
Olympian FL300 Fire Exit Series - Handed
Doors – For all types of single and double door applications. Available
for 1-3/4" to 2-1/4" thick, up to 4'-0" wide opening. For thicker
doors, consult factory. Furnished standard for 1-3/4" thick, 3'-0" wide
opening.
Device – Covers ANSI A115.1 (Type 86) Mortise Lock preparation.
Covers – Lock Stile and Hinge Stile Assembly, Cold drawn Bronze,
Brass, Stainless Steel.
Chassis – Lock Stile and Hinge Stile Assembly, Investment Cast Steel,
Zinc Dichromated.
Arms – Forged Brass or Bronze.
Crossbar – 1 Bronze, Brass or Stainless Steel tubing
furnished standard for a 3'-0" Door. For wider doors, specify door
width. Knurled and Reinforced crossbars are available.
Dogging – Hex Key dogging standard for Panic Hardware. NOT
available on Fire Exit Hardware.
Handed – Specify hand when ordering as RHRB or LHRB. Standard
packaging is RHRB.
UL Listed – Panic and Fire Exit Hardware. For FIRE EXIT HARDWARE
Ratings see page 15. Conforms to UL10C and
UBC 7-2.
ANSI/BHMA - Devices are BHMA certified for ANSI 156.3,
Grade 1.
Finishes –
605
612
•
•
606
613
•
•
For Finish description see page 3.
Cylinders – Mortise type, not furnished standard. For
cylinder details see page 13.
Stile Width – See Stile Information on page 14.
Crossbar Height – 34-5/8" to centerline from finish floor standard.
May be varied as situation dictates, consult factory.
DEVICE OPTIONS
Suffix
Description
CBK
Knurled Crossbar .....................................................................12
CBR
Reinforced Crossbar ...............................................................12
LD
Less Dogging .............................................................................12
SNB
Sex Nut and Bolt ......................................................................3
SEC
Security Screws ........................................................................3
To specify add Suffix to Device No. (e.g. 103SEC)
Olympian 100, 200, 300 Series
8
625
•
630
•
Page
Exit Devices
Mortise Lock - Handed
Fits doors machined per ANSI A115.1 for Federal Lock
86.
Backset – 2-3/4".
Case – Wrought Steel, Zinc Dichromate finish.
Lock Front Plate – 8" x 1-1/4" Bronze, Brass or Stainless Steel,
pivots for beveled or square edged doors.
Latchbolt – Stainless Steel, Deadlocking, 3/4" throw,
anti-friction.
Guardbolt – Stainless Steel, sliding type.
Finishes – LOCK FRONT PLATE and STRIKE
605
612
•
•
606
613
•
•
For Finish description see page 3.
Strikes – No. S982 handed curved lip strike standard.
For optional strikes see page 10.
Lock No – M303 for 01, 02 and 03 functions.
M308 for 05, 05A, 08 and 08A functions.
1-1/4"
4"
8"
Mortise Lock Dimensions
Type
625
•
630
•
4-1/8"
2-3/4"
5-3/4"