ページを印刷する
AK-EC-12 - user manual
Removing the most common problems
Problem
The charger does not
work (LEDs do not light)
Car does not charge
How to use
1. Check that the charger or cable is not damaged.
2. Make sure the charger has the right type of plug for your car.
3. Turn off the car motor.
4. Check that the power socket is not damaged.
5. Connect the charger to the electrical outlet (IEC 60309).
6. Select the appropriate charging current by pressing the button.
7. Pull the protective cap off the plug.
8. Connect the other plug to the car's charging port.
9. The charging process will start automatically. The red diode will light up.
10. When the charging process is finished, the charger will automatically turn off. The LEDs will
turn off.
11. After charging, disconnect the charger from the electrical outlet, then disconnect the plug
from the car's charging port by pressing the button that releases the clip and put the
protective cap on.
Cause
No voltage
Problem with the plug
There is a suspicion of a
product defect
EV charger is not
connected to the car
Car does not prepare to
charging properly
Problem with the plug
There is a suspicion of a
product defect
Solution
Check if charger is properly
ź
connected to the car charging
port
Check if EV charger is properly
ź
connected to the car charging
port
Stop using and contact the
ź
seller
Connect the charger to the car
ź
Check if car motor is turn on
ź
Make sure that the another
ź
charger is not connected to
car's second charging port
Check if the plug is connected
ź
correctly
Stop using and contact the
ź
seller
p. 3
str. 4