- ページ 3
ケーブルとコネクター Akyga AK-EC-09のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Akyga AK-EC-09 5 ページ。 Ev cable
ページを印刷するAK-EC-09 - user manual
Cleaning the EV cable
Disconect the EV cable from the electrical socket and connected devices before cleaning.
Use soft and antistatic cloth for cleaning the cable.
ź
Do not use abrasive or chemical cleaners.
ź
Removing the most common problems
Problem
The cable does not work
Vehicle does not charge
How to use
1. Prepare the vehicle for charging in accordance with the user manual.
2. Check that the product is not damaged.
3. Make sure the product has the right type of plug for your vehicle.
4. Check that the vehicle's and power surce's socket are not damaged.
5. Pull the protective cap off the plug.
6. Connect the cable to the power source with a Type 2 plug.
7. Connect the Type 2 plug to the charging port of the vehicle.
8. After charging, disconnect the product from the power source and car's charging port by
pressing the button that releases the clip and put the protective cap on.
Cause
No voltage
Problem with the plug
There is a suspicion of a
product defect
Vehicle does not prepare
to charging properly
Problem with the plug
There is a suspicion of a
product defect
Solution
Check the correct connection of
ź
the cable to the power source
Check if EV cable is properly
ź
connected to the vehicle and
power source
Stop using and contact the
ź
seller
Make sure that the another
ź
charger is not connected to
car's second charging port
Read the vehicle manual
ź
Check if the plug is connected
ź
correctly
Stop using and contact the
ź
seller
p. 3