ドア開閉システム Dormakaba LA GARD 700 SeriesのPDF 操作説明をオンラインで閲覧またはダウンロードできます。Dormakaba LA GARD 700 Series 4 ページ。 Reset box
Dormakaba LA GARD 700 Series にも：クイック・スタート・マニュアル (3 ページ), クイック・スタート・マニュアル (4 ページ), ユーザーマニュアル (20 ページ)

ページを印刷する

LA GARD 700 Basic

Operating Instructions

Dual-Handed Swing Bolt or Deadbolt

Compatibility and Identification

• 700 Basic Keypads and Locks are not Compatible with 700 Series or LA GARD Legacy Locks and Keypads.

• 700 Basic Keypads and Locks are compatible with these 700 Series Software and these 700 Series Accessories:

– 700 Series Reset Box (Part Number 704065)

– 700 Series AC-Power Supply (Part Number 701131)

– 700 Series Software for Firmware Update Only

– 700 Series USB Dongle (Part Number 707040)

– 700 Series USB to Mini0USB Cable (Part Number 203325)

• Identify an installed LA GARD Basic Lock by pressing # on the keypad. 700 Basic Keypads will illuminate the backlight feature

but will not respond to this command.

Note: Keypad Models 701-705 will respond with a green LED

User Operations

Reset Lock

Open Lock

Change Own Combination

Enable/Reinstate User

Disable User

Delete User

Firmware Update (Requires

Connection to 700 Series Software)

 Super Master Reset Code Must be changed from default prior to changing the Manager Combination. This is the only opportunity

to Set the code. Once set, it cannot be changed. If it is not set at this time, the Super Master Reset function will not be available.

Lock Operating and Navigation

• To Open a lock, Enter 6 Digit Combination.

• Lock must be opened within 4 seconds of entering a valid combination.

• To open a container with a Swing Bolt Lock, turn the container handle to the open position and open the door.

• To open container with a Dead Bolt Lock, turn the keypad or dial to retract the bolt and open the door.

• When closing a container, verify that it has been secured.

• To enter a lock operation command, enter the 6-digit combination and hold the last digit for 3 seconds until the keypad

responds with

and the LED will remains on.

• If a mistake is made while entering a combination or command, wait thirty seconds and repeat the operation.

• A Double Signal

• A Triple Signal

• Super Master Reset Code (SMR) must be changed from the default 55555555 before the Manager Combination is changed or

the SMR option will be unavailable. Once the Super Master Reset Code has been set it cannot be changed unless the lock is

reset using a compatible Reset Box.

Super Master Reset Code (Optional)

indicates that the combination or command valid and accepted.

indicates that the combination or command is invalid.

Yes



Manager

User

Yes