- ページ 2

ドア開閉システム Dormakaba LA GARD 701のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Dormakaba LA GARD 701 5 ページ。

Introduction

The LA GARD Keypad is the User interface for the entire System. The Keypad comes in two varieties: Display

and non-Display. The Display variant shows messages on screen while the non-Display version requires various

button combinations to carry out specific functions. The Keypad supports up to 5 safe locks at a given time with

the Multiplexer accessory.

Mount an Keypad

Prior to connecting a safe lock to a Keypad, the Keypad must first be mounted to the exterior of the safe door.

Follow these steps to properly mount a Keypad to the safe door:

Drill and tap the holes into the outside of the safe wall using the provided drill and tap template. Deburr

the middle hole with a file or rotary tool.

Note: Some safe manufacturers might include these holes at the OEM level.

2. Attach the Keypad base plate onto the safe door using the provided Phillips head screws. The screws

provided come in two variants: Metric M4-07 or US Customary Unit #8-32.

3. If mounting a deadbolt or springbolt, do the following:

Do not use the anti-rotate device during this process, as it will render the safe permanently locked.

a. Run the safe lock cable through the cable holder and place the cable holder over the

corresponding posts of the Keypad body

b. Press the spindle all the way through the bottom of the plastic housing

c. Place the Keypad on the door. Rotate the Keypad 25 degrees clockwise so that it is vertically

aligned. Measure 0.354 inches (9.0 mm) past the edge of the safe door and mark the spindle

with a pen or marker.

d. Remove the Keypad from the safe door and remove the spindle from the Keypad

e. Cut the spindle to the appropriate length as determined from Step c

Place the newly cut spindle into the Keypad, once again feeding it through the cable and spindle

holder

g. Run the safe lock cable through the opening in the safe door

h. Place the Keypad over the opening in the grooves of the base plate and rotate it 25 degrees to

the vertical position

dormakaba USA Inc. | Keypad Installation Guide 7033.0320