- ページ 10

パワーパック Bolt Cyclone X PP-600のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Bolt Cyclone X PP-600 20 ページ。 For portable flashes

Connecting Your Cyclone X

To connect your Cyclone X to your flash unit:

1. Plug the metal connector of the connection cable

firmly into the output socket of the Cyclone X.

2. Plug the other end of the connection cable

securely into the compatible power port on your

flash unit and turn on the flash.

3. Press the power button on the Cyclone X and wait

for the battery LEDs to light up.

4. The LED battery level indicators will glow red to

indicate the charge level of the battery when the

Cyclone X is connected to your flash unit.

To disconnect your Cyclone X from your flash unit:

1. Press and hold the power button until the battery

LEDs turn off.

2. Unplug the connection cable from the Power Pack.

3. Unplug the connection cable from the flash unit.