ページを印刷する
AK-CA-24 - user manual
1
7
1. Knob for changing the speed of fan 1
The knob is used to control the speed of fan 1. This control is carried out by varying the fan supply
voltage from 8.4 to 11 V.
2. Fan 1 and CPU sensor parameters
On the left side of the display, there is the current temperature reading from the sensor marked CPU and
the speed value of fan 1.
3. Fan 2 and SYS sensor parameters
On the right side of the display, there is the current temperature reading from the sensor marked SYS
and the speed value of fan 2.
4. Knob for changing the speed of fan 2
The knob controls the speed of fan 2 by varying the fan supply voltage from 7.9 to 12 V.
5. USB 3.0 Port
6. USB 3.0 Port
7. Fan connector 1
The 4 / 3-pin hybrid connector is used to connect the fan.
2
3
5
6
8
9
4
10
11
12
p. 3