- ページ 8

室内装飾品 Bolton Furniture AVAN24WHCCのPDF 組立説明書をオンラインで閲覧またはダウンロードできます。Bolton Furniture AVAN24WHCC 8 ページ。 24"vanity

Step 11

Mark the location of the Studs in the wall on the stretcher rail.

. Drill a 1/16" thru hole in the center of the Stretcher Rail at the

location of the studs in the wall.

. Secure the Vanity to the wall using screws (I)

Make sure the screws align with the Stud in the wall.

. If hole locations do not align with stud in wall, install the EZ

Anchor(J) in to drywall and then screwing the EZ Anchor in to

the drywall.

a.Screw self-drilling EZ Anchor into drywall, using moderate

pressure

b.Turn the drywall anchor in until the lip is flush with the wall

c.Secure the vanity to the wall by screwing into the EZ Anchor

Note: The vanity should be secured to at least 1 stud in the

wall.

5/1/2022

8 of 8

Stud

AVAN24WHCC 24"VANITY

4*50mm Screw

4*40mm Anchor