- ページ 11

配管製品 CANTERBURY Z1408のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。CANTERBURY Z1408 13 ページ。 Basin mixer with automatic pop-up waste

Care and Maintenance Instructions Model : Z1408

MAINTENANCE FOR THREE HOLE/TWO LEVER TAPWARE

INSTRUCTIONS FOR REPLACEMENT OF THE HOT OR COLD CARTRIDGE

Do not replace the cartridge if there is low flow or no flow. Low flow or no flow is caused by obstruction or

kinking of supply hoses.

❶

If the hand spray is leaking, do not replace the diverter. Service or replace the hand

 Turn off the hot and cold supply lines to the tap set.

(Not shown).

spray if there is a continous leak.

 Remove the handle and retaining flange. Refer to

"Removing and replacing a handle" section,

page10.

❸

 Install new cartridge.

 Secure the cartridge with a smooth jawed shifter.

Note: Do not over tighten as this could damage the ceramic

cartridge!

Further information Phone (03) 9761 4603

❷

 Remove the cartridge with a smooth jawed 17mm

shifter.

❹

 Install lever and retaining flange. DO NOT USE A

SHIFTER TIGHTEN BY HAND ONLY!

 Turn on supply line and test for leaks. (Not shown).

Continue.......