- ページ 9

スカウトカメラ Boly SG520のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Boly SG520 18 ページ。 Infrared digital scouting camera
Boly SG520 にも：マニュアル (6 ページ)

Boly Trail Camera-SG520

programmed settings. Hunting mode is automatically activated

if the camera is turned on and left alone for 20 seconds. Before

entering Hunting Mode, the front (red) LED light will

continuously blink for approximately 10 seconds, and then turn

off. This delay time allows you to adjust the camera's position

before the camera becomes active if needed. To "wake" the

camera and access the camera menu functions, press and hold

the OK button, until the display becomes active.

OFF Mode

To turn off the camera when the display screen is active, press

and hold the OK button until the screen powers off. The camera

will still consume a small amount of battery power while in OFF

mode, so it is recommended to remove the batteries if the

camera will not be used for a long period of time.

2.4 Trigger Mode

PIR Triggering: The default setting is on, which means the

camera is only active when motion is detected. If PIR sensitivity

is set to OFF, the camera stops responding to motion.

Timer Triggering: The default setting is OFF, which means

timer triggering is disabled. When the timer triggering interval

is set to a non-zero value, the camera starts to work at a preset

Page 5