- ページ 13

マザーボード Asus SURROUNDVIEWのPDF インストールとセットアップをオンラインで閲覧またはダウンロードできます。Asus SURROUNDVIEW 22 ページ。 Motherboard diy troubleshooting guide

Enabling

SURROUNDVIEW™

Enable SURROUNDVIEW using the system BIOS settings.

To enable SURROUNDVIEW

• The motherboard manufacturer must provide an

option in CMOS to enable / disable internal

graphics when external graphics cards are used.

• Implementation may vary, depending upon the

motherboard manufacturer.

Restart your system, and then enter CMOS setup (see the

illustration on the following page).

When restarting, most computers prompt you to press

certain keys (usually F10, DEL, F2, or F8) to enter Setup.

If this does not occur, refer to the manufacturer's

documentation.

The CMOS Setup screen appears.

Use the arrow keys (

Chipset Features, and then press Enter.

The Advanced Chipset Features screen appears.

Use the arrow keys to navigate to AGP Aperture Size, and

then use the + or – key to set it to 128. (This is the

recommended setting for best general performance;

SURROUNDVIEW does not require it.)

Your system must have at least 256MB of RAM to use an

AGP Aperture size of 128 (see

page

2).

Use the arrow keys to navigate to UMA Frame Buffer

Size, and then set it to 64MB. Press Esc to return to the

CMOS Setup screen.

Use the arrow keys to navigate to Integrated Peripherals,

and then press Enter.

The Integrated Peripherals screen appears.

Use the arrow keys to navigate to Init Display First, and

then set it to AGP.

Enabling SURROUNDVIEW™

) to navigate to Advanced

System Requirements on