- ページ 13
マザーボード Asus TUF GAMING B660M-E D4のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Asus TUF GAMING B660M-E D4 40 ページ。
Asus TUF GAMING B660M-E D4 にも： クイック・スタート・マニュアル (2 ページ)
ページを印刷する
•
M.2_1 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 X4)
•
M.2_2 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 X4)
•
To enable Intel
PCH-attached slots with Intel
7. SATA 6Gb/s ports
The SATA 6Gb/s ports allow you to connect SATA devices such as optical disc drives and
hard disk drives via SATA cables.
8. USB 3.2 Gen 1 header
The USB 3.2 Gen 1 header allows you to connect a USB 3.2 Gen 1
module for additional two USB 3.2 Gen 1 ports. The USB 3.2 Gen
1 header provides data transfer speeds of up to 5 Gb/s.
The USB 3.2 Gen 1 module is purchased separately.
9.
USB 3.2 Gen 2 Type-C
The USB 3.2 Gen 2 Type-C
Gen 2 Type-C
module for an additional USB 3.2 Gen 2 Type-C
®
The USB 3.2 Gen 2 Type-C
up to 10 Gb/s.
10. USB 2.0 headers
The two USB 2.0 headers allow you to connect USB modules for additional
four USB 2.0 ports. The USB 2.0 headers provide data transfer speeds of
up to 480 Mb/s.
DO NOT connect a 1394 cable to the USB connectors. Doing so will
damage the motherboard!
The USB 2.0 module is purchased separately.
11. Addressable Gen 2 headers
The Addressable Gen 2 headers allow you to connect individually
addressable RGB WS2812B LED strips or WS2812B based LED strips.
The Addressable Gen 2 header supports WS2812B addressable RGB
LED strips (5V/Data/Ground), with a maximum power rating of 3A (5V)
and the addressable headers on this board can handle a combined
maximum of 500 LEDs.
Before you install or remove any component, ensure that the power supply is switched off
or the power cord is detached from the power supply. Failure to do so may cause severe
damage to the motherboard, peripherals, or components.
ASUS TUF GAMING B660M-E D4
Optane™ Memory (Hybrid Storage device), it must be installed in
®
Rapid Storage Technology.
®
Front Panel connector
®
connector allows you to connect a USB 3.2
®
connector provides data transfer speeds of
®
PIN 1
USB3+5V
USB3+5V
IntA_P1_SSRX-
IntA_P2_SSRX-
IntA_P1_SSRX+
IntA_P2_SSRX+
GND
GND
IntA_P1_SSTX-
IntA_P2_SSTX-
IntA_P1_SSTX+
IntA_P2_SSTX+
GND
GND
IntA_P1_D-
IntA_P2_D-
IntA_P1_D+
IntA_P2_D+
GND
port.
®
ADD_GEN 2
1-3