- ページ 3

マザーボード Asus XEONのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Asus XEON 4 ページ。 Xeon installation procedure central processing unit (cpu)

Xeon Installation Procedure

Step 3: Install the Retention Mechanism Brace Bars

Place the retention mechanism brace bar into the groove on the top of the retention

mechanism as shown in the picture below. These pictures are views of the mother-

board and retention mechanism with the ATX connectors away from yourself.

(Item 6) Retention Mechanism Brace Bar

Retention mechanism with

brace bar on top

Step 4: Install Cartridge Lifters

Each Xeon processor requires two lifters in order to allow safe removal of the pro-

cessor. The lifters clamps the cartridge on the two holes at each top corner.

(Item 5) CPU Lifter

One lifter being inserted over the

cartridge from a vertical position

Step 5: Install a 2nd Processor or Termination Module

The motherboard supports a single or dual processor configuration. When a single

processor configuration is desired, a front side bus termination module is required

on the free slot 2 connector.

(Item 7) Front Side Bus Termination Module

Single processor configuration with terminator.

One retention mechanism

with brace bar installed

Half-colapsed lifter after installation. The

lifter should freely rise and lower.

Dual processor configuration.

ASUS Xeon Installation Guide

Both retention mechanisms

with both brace bars installed