ページを印刷する
1.2.6
Onboard buttons and switches
open-case system. This is ideal for overclockers and gamers who continually change settings
to enhance system performance.
1.
MemOK! button
Installing DIMMs that are not compatible with the motherboard may cause system
boot failure, and the DRAM_LED near the MemOK! button lights continuously. Press
and hold the MemOK! button until the DRAM_LED starts blinking to begin automatic
memory compatibility tuning for successful boot.
I II
Z97-C
Z97-C MemOK! button
system and reinstall the DIMM before using the MemOK! function.
takes about 30 seconds for the system to test one set of failsafe settings. If the test
fails, the system reboots and test the next set of failsafe settings. The blinking speed
of the DRAM_LED increases, indicating different test processes.
timing set is tested. If the installed DIMMs still fail to boot after the whole tuning
process, the DRAM_LED lights continuously. Replace the DIMMs with ones
www.asus.com.
continues memory tuning after turning on the computer. To stop memory tuning, turn
off the computer and unplug the power cord for about 5–10 seconds.
to boot and load the BIOS default settings. A message will appear during POST
reminding you that the BIOS has been restored to its default settings.
www.asus.com after using the MemOK! function.
ASUS Z97-C
1.2.8 Onboard LEDs for the exact location of the DRAM_LED.
®
OS environment.
1-11