- ページ 5

屋外暖炉 Canvas 085-1558-6のPDF 組立説明書をオンラインで閲覧またはダウンロードできます。Canvas 085-1558-6 11 ページ。 York outdoor fire table

ページを印刷する

MODEL NO. 085-1558-6

L-FT1109PST-B

Product size:W40"XD28"XH17",When in use, keep cylin-

der at least 30 in / 76.2 cm side clearance from fire pit

table, DO NOT trip over the gas pipe between fire pit and

cylinder when passing through, to prevent cylinder from

tipping over.

Inspect the hose assembly and burner prior to each use.

If there is evidence of excessive abrasion or wear or if the

hose or burner is damaged, it must be replaced with the

appropriate part from the manufacturer.

Inspect the gas connections of the appliance prior to

each use. Do not operate the unit if there is a gas leak. Have

the appliance inspected annually by a qualified service person.

The pressure regulator and hose assembly provided with the appliance must be used. The replace-

ment part must be the same as the part specified by manufacturer.

For the assembly of LP-gas and leak checking please refer to "Gas Connection" on page 8 and "Leak

Test" on page 9.

Children and adults should be alerted to the hazards of high surface temperatures and should

stay away to avoid burns or prevent clothing ignition.

Young children and pets should be carefully supervised when they are in the area of the appli-

ance.

Any guard or other protective device removed for servicing the appliance must be replaced prior

to operation.

Clothing or other flammable materials should not be hung from the appliance or placed on or

near the appliance.

Do not use the appliance if any part has been under water. Immediately call a qualified technician

to inspect the appliance and to replace any part of the control system and any gas control which has

been under water.

LP-gas supply cylinder to be used must be constructed and marked in accordance with the specifi-

cations for LP-gas cylinders of the Canadian. Department of Transportation (DOT).

The cylinders supply system must be arranged for vapour withdrawal and the cylinder must include

a collar to protect the cylinder valve.

Use only 20 lb / 9 kg LP-Gas cylinders.

Do not burn wood or any other materials in this appliance.

The appliance must be isolated from the gas supply piping system by closing its individual manual

shutoff valve during any pressure testing of the gas supply piping system at test pressure equal to or

less than 1/2 PSI (3.5 kPa).

Other cylinders may be acceptable for use with the appliance provided they are compatible with

the appliance retention means and accompanied by illustration(s) depicting the cylinder mounted to

the appliance utilizing the cylinder retention means and the point of contact between the cylinder and

the retention means.

Properly place the hose out of pathways where people may trip over it

or in areas where it may be subject to accidental damage.

The burner must be replaced prior to the appliance being put into

operation if it is evident that the burner is damaged. The replacement

burner must be the same as the part specified by manufacturer.

For cleaning of the appliance including the burner, please refer to

"Storage and Maintenance" on page 10.