- ページ 4
自動車バッテリー充電器 Battery Fighter bca1702wrのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Battery Fighter bca1702wr 10 ページ。 Intelligent battery charger for both lead acid & lithium (lipo & lifepo4) 12v automotive batteries
ページを印刷する
SELECTION FOR BATTERY TYPE
A.C. power is connected with the wall socket properly
Press MODE button for battery charge mode selection before you connect the charger to the battery terminals.
LED Signal
LifePO4
LiPO
12V 7A
12V 1.8A
LIGHT INDICATION:
1) Pb Charging mode (Lead–acid battery charging mode ）
LED SIGNAL
POWER
MODE
12V 1.8A
12V 7A
REVERSE POLARITY
RECOVERY
FULLY CHARGE /
MAINTENANCE
BAD BATTERY
BCA1702WR - 140717
Explanation
LiFePO charging
LiPO charging
Lead Acid charging
Lead Acid charging
A.C. power is connected with the wall socket properly and self-test will be commenced, the LEDs
will be flashing in following sequence - Reverse Polarity LED -> 12V 1.8A LED -> Bad Battery
LED -> 12V 7A LED -> Recovery LED -> Li-Po LED. After completed the self-test, it will enter
into standby mode. Standby : POWER LED is flashing ; Charging : POWER LED is glowing
Press the MODE button for the selection of charging program.
PB charging status : the charger is switched to 12V lead acid (Pb) battery charging mode with
maximum current 1.8A
PB charging status : the charger is switched to 12V lead acid (Pb) battery charging mode with
maximum current 7A
Battery is connected in reverse polarity, please check the battery connection(s) and correct
reverse polarity condition. ( Make sure Red to "+" and Black to "-")
Battery Recovery processes will commence if the charger detects any charge acceptance
problems. Recovery processes include: Battery Rescue Phase, Soft Start Phase, Pulse Mode
Phase and Recondition Phase. Once the Recovery processes are completed, normal charge will
commence immediately. Recovery function in effect for Lead Acid charging mode (12V 7A; 12V
1.8A) only.
The charging process is completed and the battery is in maintenance mode, it can be returned to
service if necessary or left safely connected to the charger indefinitely. Maintenance function in
effect for Lead Acid charging mode (12V 7A; 12V 1.8A) only. The LED will be flashing while
approaching fully charged and glowing in fully charge or maintenance stage
The battery is worn out or is possibly defective. Suggest replacing battery ASAP
Description
Lithium iron phosphate (LiFePO4) battery charge
mode
Lithium polymer (LiPO) battery charge mode
12V lead acid battery charge mode at 7A max.
12V lead acid battery charge mode at 1.8A max.
EXPLANATION