ページを印刷する
Charging Paragon Probe
There is a low battery indicator that will illuminate
when the battery has 15% capacity remaining .
To charge, insert the micro USB cord (included
within the box) into the bottom of the Paragon
Probe and then insert the other end into a USB port
or 5 volt wall adapter* to charge.
It is recommended to allow the probe to charge for
at least 4 hours. Fully charged, the battery will last
~40 hours. If you are performing a long term cook
of more than 40 hours using the probe, it can be
plugged in and charging while in use to prevent
interruptions in the cook cycle.
*5 volt wall adapter not included.
Cleaning Paragon Probe
Turn o the probe before cleaning.
Gently wipe it down with a damp cloth and a
mild soap. Do not submerge the black and grey
plastic section in water at any time.
CAUTION:
water resistant, but not water tight. DO NOT
put it in the dishwasher to clean or submerge
the electronics portion underwater.
8
Micro USB is located on the
bottom of the probe .
The Paragon Probe is
Electronics are located within
the hard plastic body.