- ページ 7

鉄 Daewoo electricals SDA1210のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Daewoo electricals SDA1210 9 ページ。 2000w steam station with fast steam output and 900ml water tank

ページを印刷する

To clean the body of the steam station use a soft damp cloth.

Do not use strong detergents or harsh abrasive cleaners to clean the steam

station

Electrical Connections

This appliance is fitted with a fused three-pin plug to BS 1363. If the plug has to

be removed, it should be cut off and carefully disposed of immediately. To avoid a

possible shock hazard, do not insert the discarded plug into a mains socket.

Fitting a new plug

The mains lead must be connected as shown below. The wires are coloured with

the following code - Brown wire = Live (L), Blue wire = Neutral (N), Green &

Yellow = Earth (E).

• The Blue wire must be connected to the terminal marked N or coloured Black.

• The Brown wire must be connected to the terminal marked L or coloured Red.

• The Green & Yellow wire must be connected to the terminal marked E or coloured

Green.

• Check that there are no cut or stray strands of wire inside the plug.

• Use a 13 Amp BS 1362 fuse, only use BSI or ASTA approved fuses.

• If you are in any way unsure which plug or fuse to use, always refer to a qualified

electrician.

• After replacing or changing a fuse on a moulded plug, the cover must be refitted

to the plug; the appliance must not be used without a fuse cover.

Connect

Green &

Yellow to

Earth (E

)

Connect

Blue to

Neutral

(N)

Connect

Brown to

Live (L)

Ensure the outer sheath of the

mains lead is securely held by the

cable clamp