- ページ 9
ネットワーク・ハードウェア Dot Origin VTAP50のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Dot Origin VTAP50 16 ページ。 Oem module
ページを印刷する
3 Mechanical installation
The VTAP50 unit for OEM integration comprises a PCB with an integral antenna around the
perimeter of the board.
WARNING: Observe all Safety instructions when installing the VTAP50 PCB.
3.1 Power
Connect the PCB to a PC using either a MicroUSB to USB cable or the optional captive
cable (see section 3.4).
The VTAP50 is rated at 5V DC (typ. 110mA, max 150mA) for power over USB.
3.2 Environment
The VTAP50 must be stored and operated under the following conditions:
Ambient temperature -25 to +70°C (-13 to 158°F)
l
Humidity 0 to 95% RH non-condensing
l
Pressure 86-106kPa
l
VTAP50 OEM MODULE INSTALLATION GUIDE
Figure 3-1 VTAP50 components - v1 Hardware
PAGE 4