- ページ 3

ツール Dafra DNPB328のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Dafra DNPB328 10 ページ。 Rivnut tool
Dafra DNPB328 にも：操作マニュアル (10 ページ)

DNPB328 Operation Manual

c) Use a spanner to loosen the connect sleeve (#3) from the spring house (#5), take out the

mandrel (#1), transfer bar washer (#63), connect sleeve (#3), transfer bar (#4) and spring

(#6):

d) Take the transfer bar washer (#63) out and insert the required mandrel (#1) from the tool

accessories pack as per rivnut size, then mount into the connect sleeve (#3), transfer bar

(#4), together with spring (#6) install into the spring house (#5). Screw the connect sleeve

(#3) tight with spring house (#5) using a spanner:

e) Screw the knurled cover (#12) and nose pedestal (#10) back to the tool, then replace the

locknut (#65), and anvil (#2):

MANDREL PROTRUDING SET FOR BLIND NUT

1) Adjust the length of the mandrel (#1) that protrudes from the anvil (#2) according to the length

of the rivnut to be set by adjusting the position of the locknut (#65), and anvil (#2) screwed

on the mandrel (#1):

2) Never set the mandrel protruding length too long or too short for the rivnut to be set: