- ページ 13

コントロールユニット Dot Origin VTAP50のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Dot Origin VTAP50 16 ページ。 Oem module

4 Module integration instructions

The VTAP50 OEM module has been designed to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause

undesired operation

These instructions must be followed to maintain the FCC approval for the VTAP50

OEM module, when it is integrated into a host system.

CAUTION: Changes or modifications made to the VTAP50 OEM module, that have not been

expressly approved by Dot Origin Ltd could void the user's authority to operate the

equipment.

4.1 Applicable FCC rules

The VTAP50 OEM module operates at 13.56MHz and is therefore subject to FCC rules for

radio frequency devices. When a pass is presented to the reader, a person comes within

10mm of the device, so the rules relating to 'portable' transmitters apply.

The VTAP50 OEM module must be stored and operated under the following conditions:

Ambient temperature -25 to +70°C (-13 to 158°F)

Humidity 0 to 95% RH non-condensing

Pressure 86-106kPa

This module complies with FCC RF radiation exposure limits set for an uncontrolled

environment. It is expected that VTAP50 OEM modules will be mounted in places that make it

possible for people to come within 10mm of the unit and it is therefore defined by the FCC as

a 'portable' device.

Screened cable should be used, wherever possible, to connect VTAP50 OEM modules to

other devices, to avoid interference from other equipment.

The end-user manual for the host equipment, that contains a VTAP50 OEM module, must

clearly indicate the operating conditions to be observed, so that the user remains in

compliance with current FCC RF exposure guidelines.

VTAP50 OEM MODULE INSTALLATION GUIDE

PAGE 8