- ページ 7
景観照明 Dot-Spot colorgarden 1er SetのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Dot-Spot colorgarden 1er Set 11 ページ。 Mini led garden spot
ページを印刷するTechnical specifications
Technical specifications
tension
12 V
wattage
3 W
light color
warmwhite, 2700 K
lighting current
210 lumen
radiation angle
40°
connection cable
5 m with low voltage plug (IP 44)
protection class
spot IP 68 / power supply IP 44
power supply
input 230 V 50 Hz / output 12 V
wattage power supply
single set 6 W / triple set 20 W
12
50 mm
50
mm
38 mm
65 mm
Ø 30 mm
50 mm
250 mm
30
mm
Safety precautions / preparation
Safety precautions
Observe applicable safety regulations for installation. Installation must be performed by
38 mm
a qualified electrician. The spot runs on 12 V electrical power. To avoid danger, separate
the dot-spot Mini LED garden spot from the power supply before any work. The spot can
65 mm
not be opened. Connect the spot only to a transformer with an output voltage of no more
than 12 V. Incorrect voltage can destroy the spot and the transformer. Connect the
transformer only if the electrical rating specified on the transformer matches your main
power socket rating.
High ambient temperatures impact the LED's life expectancy. In order to ensure the
LED's long life it is advisable to make sure of adequate heat conduction. Therefore do
not run the spot in ambient temperatures > 50°C.
Tight sealing of the Mini LED garden spot can only be guaranteed if the outer sleeve of
the connecting cable is undamaged and the connecting cable is clamped in a water tight
manner. Otherwise, penetrating moisture can reach and destroy the spot's electronics,
due to the capillary effect.
Preparation
Unpack the whole scope of delivery and check the content, which depends on the scope,
for completeness and integrity.
Dispose of any packaging material you no longer require in line with local regulations. If
you notice any transport damage, please contact immediately the dealer from whom you
purchased the spot.
13