- ページ 7

モニター Dot-x DNR V SERIESのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Dot-x DNR V SERIES 12 ページ。 25 inch display
Dot-x DNR V SERIES にも：ユーザーマニュアル (10 ページ)

ページを印刷する

03 POWER MANAGE: Range is 0-7. 1-7 is the length of time (in hours) that the

set will continue to operate if unattended. When the set nears turn off time, an

on-screen message appears telling you to press any key to continue normal

viewing. When set to 0, this feature is inactive.

04 VERT POS: Moves On-Screen Displays vertically. The Range is from 0-25.

This adjustment is generally set at 5.

05 HORZ POS: Moves On-Screen Displays horizontally. Range is from 1-15.

Generally set at 9.

06 BAND/AFC: There are eight positions:

0 is Broadcast fixed

2 is HRC afc

1 is CATV afc

3 is ICC afc

07 MIN VOLUME: Allows adjustment of minimum volume level. Range is 0-63.

When this item is set to 0, the sound level can be adjusted down to zero.

08 MAX VOLUME: Allows the adjustment of maximum volume level. Range is

0-63. When this item is set to 63, the set has full adjustment capability.

09 AC ON: Has two positions; 0 is off, and 1 is on. In ON position, the display

set will turn on and off when AC power is applied.

10 KEY DEFEAT: Prevents the end user from accessing screen menus on the

front panel (Menu, Select, Adjust), only can be accessed by the Menu in the

remote control.

11 STRT CH: Determines the channel that is selected automatically each time

the display is turned on and sets the audio volume level at turn-on. Range is 0-

255. 0 is the Aux position and 255 is Off. Use ADJUST to change the channel

number.

12 STRT VOL: Determines the volume that is selected automatically each time

the display is turned on and sets the audio volume level at turn-on. Range is 0-

255. 0 is the Aux position and 255 is off.

13 HOSPITAL MODE: The default is 0 for Concierge and 1 for Hospital Models.

If it is 1 the Private IR codes are selected. Used with feature level to select IR

code type. Range is 0-2.

14 CHAN LOCK: Defeats tuning operations. Range is 0-1. 0 is Off and 1 is On.

In combination with the START channel, it can lock-on a particular channel

15 GHOST CH: Ghost channel when item #11 is set to zero. Zero is off and 1 is

on. When on, the channel number will stay on screen at all times, unless

captions are present. The number moves slightly to prevent damage to the

screen. If captions are on, ghost channel will not be present.

16 SCAN MODE: Range is 0-3. The sets turn off when channel scan buttons

are being used. In 0 mode, scan off is inoperative. In position 1, the set will turn

off between auxiliary and lowest channel. In position 2, the set will turn off

between auxiliary and FM. In position 3, the set turns off after an FM station

4 is Broadcast afc

6 is HRC fixed

5 is CATV fixed

7 is ICC fixed

REGULATORY NOTICES

DHHS: This product complies with applicable DHHS Standards under the

Radiation Control for Health and Safety Act of 1968.

X-Ray Precaution: This product includes critical electrical parts essential

for X-radiation protection. Under no circumstances should the operator

attempt to disassemble or modify the display.

WARNING: Changes or modifications not expressly approved by the party

responsible for compliance with the FCC's rules (The FCC "Grantee") could

void the user's authority to operate this equipment.

NOTE: This equipment has been tested and found to comply with the

limits for a Class A digital device, following Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio

frequency energy and if not installed and used in accordance with this

operation manual, may cause interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference, in which case the user will be required to correct the interfer-

ence at his or her own expense.

If necessary, the user should consult an experienced radio/television tech-

nician for additional suggestions. The user may find the following booklet

prepared by the Federal Communications Commission helpful:

"How to Identify and Resolve Radio-TV Interference Problems"

This booklet is available from the U.S. Government Printing Office, Washing-

ton, DC 20402, Stock No. 004-000-00345-4.

It is necessary to use shielded interconnect cable with this monitor to insure

compliance with FCC Class A limits for radio frequency emissions.