- ページ 8

ボート Dagger TouringのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Dagger Touring 16 ページ。 Recreational kayak
Dagger Touring にも：オーナーズマニュアル (12 ページ), オーナーズマニュアル (20 ページ)

ページを印刷する

UTFITTING:

OOT

RACES

FOAM FOOT BRACES

Dagger playboats are fitted with foam foot

braces. These are lightweight, simple and allow

you to get a custom fit while maximizing foot

room. Always outfit your boat wearing the gear

you'll wear on the water.

Use these instructions to help understand

your kayak and its different parts. Not all

kayaks will feature all outfitting shown.

We recommend adding additional foam

padding to bulkhead footrests for comfort

and shock absorption.

For further instruction, visit Dagger.com

BULKHEAD FOOT BRACES

Bulkhead footbraces help to distribute the force

of a frontal impact and are fitted in some of our

whitewater kayaks. To adjust the footbrace:

Unscrew and remove the retaining thumb nuts and

move the aluminium runners backwards or forwards

until correct fit is achieved. Always test the fit by

sitting in the kayak. Adjust the footbrace to be

comfortably tight without hindering your exit from

the cockpit.

All bulkheads are also adjustable for width and

height. You should adjust them to the maximum area

as allowed by the internal dimensions of the kayak.

Bulkhead footbraces come with foam blocks for

custom fit and safety. Step-by-step instructions

available at Dagger.com

SLIDELOCK FOOT BRACES

First, sit in an upright position to begin adjusting

the footpegs. There is a black plastic rod

extending from the footpeg to your knee that

adjusts the position. Lift the rod slightly to

release the peg and then either slide the peg

forward or back to find the correct position.

Releasing the rod will lock it in place. With just a

slight amount of foot pressure the peg should be

snug against your foot.

Lift

Unscrew and

remove plastic

thumb nuts,

adjust runners

and replace

KEEPERS FOOTBRACES:

The adjustment lever is located on the backside of

the footpedal. To adjust, squeeze the lever and slide

the footpeg to the desired location. Release the lever

to lock it in place.

Push & Pull