- ページ 8

コントローラー DAGON SPM-12のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。DAGON SPM-12 8 ページ。 Dmx-512 controller – 12 out dc / pwm

DAGON Lighting

3. Safety and correct conditions of using SPM-12 controller.

comply with power supply conditions according to technical datas

for connection diodes and power supply to outputs Q1-Q12 have to be use wires with

the diameter huge enough, depends on electric current

to connect the DMX-512 should be used special DMX shielded cable

all wires need to be protect against mechanical and thermal damages

all the operation with connecting wires and assembly have to be carry out with

disconnected power supply

all the equipment need to be protect against water and humidity

do not use lightning steering by the SPM-12 driver close to the rapidly rotating

equipment or it's elements; it may cause the stroboscope's effects what may cause the

stillness effect on the rotating equipment's which is light by impulse lights;

it may cause dangerous situation for life and healthy.

Power supply:

Current consumption - terminal V+ V-:

Number of outputs:

Outputs type:

Polarization of outputs:

Load capacity of each output:

Method of outputs work:

Signals resolution PWM:

Signals frequency PWM:

Method of control:

Number of DMX occupied channels:

Range of temperature and work condition:

Controller dimension:

The frequency of used SPM-12 signals PWM more than 100Hz cause the effect of

blinking lights (make by LED diodes connected to outputs Q1-Q12) which is not visible for

human's eyes. The visible light is stable.

Always remember to work with SPM-12 with all safety conditions, see point 3.

SPM-12 – controller DMX-512 – 12 OUT DC / PWM

9-24V DC

max 30mA

12 – Q1-Q12

OC (open collector, N-MOSFET)

common plus (common anode)

DC (ON/OFF) or PWM

8 bit

100.55 Hz

DMX-512 signal

12 or 13 - DIMMER is active

+5°C - +45°C, dry rooms

86 x 55 x 25 mm