- ページ 12

ロボット工学 DAGU Playful PuppyのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DAGU Playful Puppy 15 ページ。 Quadruped robot kit

Start by fitting the servo extension cables to the front leg servos. Now plug in your leg servos.

D2 - Rear left hip

D3 - Rear left knee

D4 - Front left hip

D5 - Front left knee

D6 - Front right knee

D11 - Front right hip

D12 - Rear right knee

D13 - Rear right hip

Make sure your white / orange control wire is closest to the female header.

Step 21. Connect your batteries.

Make sure the power switch is in the off position and then remove the tape from your black (- negative)

wire. strip the wire back, twist the strands together and then bend it over before inserting into the screw

terminal as shown in the photo. This will help to ensure a good connection. Now remove the tape on

the red wire (+ positive) and do the same.

Step 22. Add a tail