- ページ 18

モニター Asus MB168BのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Asus MB168B 26 ページ。 Usb monitor
Asus MB168B にも：ユーザーマニュアル (13 ページ)

•

Sharpness: Adjust the picture sharpness. The adjusting range

is from 0 to 100.

•

Trace Free: Speed up the response time. The adjusting range is

from 0 to 100.

•

Aspect Control: Adjust the aspect ratio to "4:3", "Full", or

"OverScan". (The "OverScan" ratio is only available for HDMI

input.)

•

ASCR: Turn on or off the ASCR (ASUS Smart Contrast Ratio)

function. (Only available at Scenery, Theater, Game, and Night

View Mode.)

•

3D Mode Selection: Select the type for 3D images.

•

3D Depth: Adjust the field depth for 3D images. The adjusting

range is from 1 to 10.

•

Position: Adjust the horizontal position (H-Position) and the

vertical position (V-Position) of the image. The adjusting range is

from 0 to 100. (Only available for VGA input.)

•

Focus: Reduce Horizontal-line noise and Vertical-line noise

of the image by adjusting (Phase) and (Clock) separately. The

adjusting range is from 0 to 100. (Only available for VGA input.)

•

3-4

Default: Turn "2D to 3D" function off.

2D to 3D: Turn "2D to 3D" function on for 2D input images

(you may also press the hotkey

3D Top-and-Bottom, 3D Side-by-Side (Half): Select the

type for incoming 3D images.

The menu "3D Mode Selection" is only available for input source of 2D type.

The menu "3D Top-and-Bottom" and "3D Side-by-Side (Half)" are only

available for HDMI source of 720p/1080i/1080p timing and no InfoFrame of

3D type.

Phase adjusts the phase of the pixel clock signal. With a wrong phase

adjustment, the screen shows horizontal disturbances.

Clock (pixel frequency) controls the number of pixels scanned by one

horizontal sweep. If the frequency is not correct, the screen shows vertical

stripes and the image is not proportional.

to access this function).

Chapter 3: OSD (On-Screen Display) Menu