ページを印刷する
3.4
Troubleshooting (FAQ)
Problem
Power LED is not ON
The power LED lights amber and
there is no screen image
Screen image is too light or dark
Screen image bounces or a wave
pattern is present in the image
Screen image has color defects
(white does not look white)
No sound or sound is low
ASUS PA169CDV LCD Monitor
Possible Solution
• Press the Power button to check if the monitor is in
the ON mode.
• Check if the power cable and adapter are
properly connected to the monitor and the power
outlet.
• Check if the monitor and the computer are in the ON
mode.
• Make sure the signal cable is properly connected the
monitor and the computer.
• Inspect the signal cable and make sure none of the
pins are bent.
• Connect the computer with another available monitor
to check if the computer is properly working.
• Adjust the Contrast and Brightness settings via
OSD.
• Make sure the signal cable is properly connected to
the monitor and the computer.
• Inspect the signal cable and make sure that none of
the pins are bent.
• Perform All Reset via OSD.
• Adjust the RGB Tuning settings or select the Color
Temperature (Color Temp.) via OSD.
• Ensure that the HDMI cable is properly connected to
the monitor and the computer.
• Adjust the volume settings of both your monitor and
HDMI device.
• Ensure that the computer graphic card driver is
properly installed and activated.
3-15