- ページ 4

シュレッダー Dahle 20430のPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Dahle 20430 4 ページ。 20400 series intermediate office shredders and 20500 series economy office shredders
Dahle 20430 にも：操作マニュアル (8 ページ), 操作マニュアル (4 ページ), 操作マニュアル (4 ページ)

ページを印刷する

TURNING ON YOUR SHREDDER

x ON, OFF and REVERSE are controlled by the black

Rocker Switch (3) on the top of the shredder.

y Moving the switch to the "I" (ON) position

places the shredder in the standby mode.

Note: Shredder will run momentarily.

z Moving the switch to the center or "O" (OFF)

position turns the shredder off.

{ The REVERSE position "R" will be discussed

in "CLEARING A PAPER JAM".

SHREDDING

Turn shredder on. Insert paper squarely into

Feed Opening (1). A light barrier (2) will auto-

matically activate the shredding mechanism.

Continue feeding paper into the Feed Opening

until the shredding mechanism begins to

draw the paper in. At this point, allow the paper

to feed into the shredder on its own. Once the

paper has passed completely through the shredding mechanism, the electronic

controls will automatically stop the machine.

Microfiche and transparencies can also be shredded in the same manner as

paper, however, you should shred a piece of paper after every 8 or 10 sheets of

plastic. This helps clean plastic particles out of the shredding mechanism.

ALWAYS TURN SHREDDER OFF IF IT WILL BE UNATTENDED FOR LONG PERIODS OF TIME

CAPACITY

Capacity is the number of sheets of 8½" x 11" paper that can be shredded at

one time. These figures are approximate and machines may vary slightly due to

various conditions. It is not recommended that you try to run your shredder at

maximum capacity, as this increases the chance of a paper jam.

Model

20 Lb. Bond

20404

20414

20422

20430

20434

20506

20514

CLEARING A PAPER JAM

If too many sheets of paper are fed into your shredder at one time, it may cause

a paper jam. Running your shredder at maximum capacity increases the

chance of a paper jam. If a paper jam occurs, it is easy to clear by following

these simple steps:

x Turn shredder off using ON/OFF/REVERSE switch (3)

y Firmly pull on paper sticking out of Feed Opening while holding

ON/OFF/REVERSE switch in the REVERSE (R) position.

z After paper has been removed from the Feed Opening, move

the ON/OFF/REVERSE switch back to the ON (I) position.

{ Separate some of the sheets and continue shredding.

IT IS NOT RECOMMENDED RUNNING SHREDDERS AT MAXIMUM CAPACITY

16 Lb. Bond