- ページ 5
マイクシステム Dotterel KonosのPDF 製品取扱説明書をオンラインで閲覧またはダウンロードできます。Dotterel Konos 8 ページ。
Dotterel Konos にも: 製品取扱説明書 (11 ページ)
3. Switch the processor box on by pressing the Power button
light around the Power button will illuminate to indicate system status.
•
Green - initial power up.
•
Blue - microphone is plugged in and system is functional.
•
Red - no data being received. Microphone may not be plugged in.
4. Check that your microphone is on and working. Plug an audio recording
device into one of the XLR ports
is sound output, then your Konos microphone is working.
5. Test that all three beam width settings are working.
Turn the Adjustable Directivity Dial
a.
Narrow (60⁰) Captures sound right in front of microphone.
b.
Medium (100⁰)
c.
Wide (180⁰) Any sound source not falling in this beam width will be
rejected.
on the processor box and test. If there
to each beam width as follows:
4
. The ring of