- ページ 13

自動車アクセサリー Double Apex MK7 Garage ControlのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Double Apex MK7 Garage Control 17 ページ。 Garage control

Step 8:

1. Before removing the covering on the control's adhesive strips, test fit

the module inside the dash opening as shown in Figure A. Make sure

there isn't any pressure put on the connectors or wire harnesses.

2. Once you're comfortable with the positioning remove the clear layer

from the adhesive strips and install the module. Keep pressure on the

module for 30 seconds to help the adhesive set.

3. Reconnect the vehicles battery and test the Garage Control button.

4. Secure the harnesses with the provided zip ties. Remove any slack

and make sure the cables are secure above the under dash cover and

clear of the pedals and steering column. Zip tie the button harness to

the metal support to the right of the accelerator peal. Tuck the button

harness below the fuse panel and zip tie it and the power harness to

the factory wiring to the left of the fuse panel. Use additional zip ties as

needed to secure the cables. Figures B and C

5. Install the control cover using the provided screws. Figure D

Figure A

Figure C

Figure B

Figure D