- ページ 3
ターンテーブル 1byone 1-AD07US01のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。1byone 1-AD07US01 11 ページ。
ページを印刷する
Product Description
1. Counterweight
2. Anti-skating Stick
3. Turntable Platter
4. Tonearm Lift Lever
5. Tonearm Rest
6. 33/45 RPM Selector
7. Tonearm
8. Stop/Start Dial
9. Cartridge
DC IN 12V
PHONO
LINE
R
L
USB-PC
10
11
12 13 14 1516 17 18
10. Lid
11. Lid Hinge
12. Ground Connector
13. PHONO & Line Out Jacks
14. PHONO & Line Out Switch
Upon opening the turntable's package, locate all of the following included items.
1) Turntable Unit
2) Power Adapter
3) Lid
4) Counterweight
5) Anti-skating Weight
6) Platter with Belt
OFF
ON
19
15. Anti-skating Weight
16. USB-PC Port
17. AC-DC Power Jack
18. Bluetooth Indicator
19. Power Switch
7) 45 RPM Adaptor
8) Slip Mat
9) Cartridge Alignment Protractor
10) USB-PC Cable
11) Instruction Manual
2
This turntable is supplied with a factory-fitted cartridge that's already adjusted.
Note: Instructions provided in this manual for adjusting the cartridge are provided in
case the cartridge is replaced at a later date by a different model.
1
2
Installing the Lid
3
Install the Lid carefully over the hinge prongs.
4
5
Turntable Platter and Belt Setup
6
7
1. Set the platter on the spindle.
8
• Make sure that the platter is fully seated on the spindle.
Opening
9
Motor pulley
Spindle
2. Place the belt on the motor pulley.
• Align one of the platter openings with the motor pulley, and, while pulling both
ends of the red ribbon that comes attached to the belt, place the belt on the
motor pulley, as per the diagram. When doing this, be careful not to twist the belt.
Red ribbon
Belt
Platter
Motor pulley
Straight
Twisted
3