- ページ 3

高圧洗浄機 Double K Industries Challeng Air AIRMAXのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Double K Industries Challeng Air AIRMAX 4 ページ。 Animal dryer

ページを印刷する

Fig. 1 Side

Motor Part

# 2069

Fig. 3

Top Down

Brush Assembly with

Brush Assembly

Metal Body (Ref #1)

Retainer (Ref #2)

Part #2065

Brush Retainer

Arm must slide into

the Male Terminal

Male Terminal

Brush Assembly

Retainer (Ref #2)

Brush Assembly with

Metal Body (Ref #1)

Retainer Screw (Ref #3)

Brush Assembly

Retainer Screw

Brush Assembly

Tab (Ref #4)

Congratulations!

Fig. 2 Top

You've just purchased the Double K CHALLENGAIR AirMax® Forced Air Dryer, which produces

warm, high velocity air under pressure, to make your animal grooming tasks easier. Your new

dryer is designed to provide long, reliable service.

Please read this manual carefully and completely before beginning operation of your dryer

and keep in a convenient and safe place for future reference.

A warranty card is included with your dryer and should be lled out completely and mailed to

Double K Industries within 30 days of the purchase date of your dryer to validate your

warranty. Online registration is available at www.DoubleKIndustries.com

Your CHALLENGAIR AirMax® has a two-year warranty covering the unit against defects in

materials and workmanship. Regular maintenance items such as brushes and lters are not

included (see warranty card for complete warranty information). It is also important to retain

your sales receipt as proof of purchase should service ever be needed.

Your CHALLENGAIR AirMax® has two brush-type motors. It is important that the brushes be

changed when they become worn down to prevent damage to your dryer motor (brushes are

Brush Assembly

maintenance components and are not covered under the warranty). We suggest checking the

motors' brushes after every 500 hours of dryer use. Please see section on BRUSHES in this

manual for instructions.

A NOTE ABOUT HEAT: Your CHALLENGAIR AirMax® has no heating element. The

CHALLENGAIR AirMax® produces heat by a " ow-thru" motor system, meaning the air is

pushed through the motors and is warmed by the natural heat of the motors that occurs

(Ref #3)

during operation. This means greater electrical savings and e ciency for you. The dryer will

reach its maximum air temperature after about 2-4 minutes of operation. (Note: The higher

the room temperature, the warmer the air from the dryer will be.)

ASSEMBLY

To attach hose to dryer: Your dryer hose has a black hose adapter that will screw onto the

hose in a counter-clockwise motion. The adapter with hose attached then ts onto the dryer

with a half-twist motion that locks the adapter onto the dryer.

First, place the adapter over the snout of the dryer with the Double K logo facing up, then turn

hose counter-clockwise until the adapter locks in place, the Double K logo should then be

sitting horizontally.

To remove hose from adapter: Turn the hose clockwise.

ATTACHMENTS: Your dryer is equipped with one hose and 4 twist-on nozzles. To attach

nozzles to hose, twist the nozzles counter-clockwise. Twist clockwise to remove.

OPERATION - Switches and Controls:

1. 2-Speed:

2. Variable Speed (optional)

Low Speed / Standard Heat - Turn on the top motor switch.

High Speed / High Heat - Turn on both motor switches.

Maximum Output - Turn the dial speed control clockwise to its maximum.

Variable Output - Turn the dial speed control clockwise to desired air output.

O Position - Turn the dial speed control counter-clockwise until it clicks o .