- ページ 8

録音機器 Doug Fleenor Design NODE2-AのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Doug Fleenor Design NODE2-A 10 ページ。 Two port ethernet to dmx512 interface

Network configuration page:

The Device Name (up to 20 characters) and Description (up to 64 characters) are fields that

can be queried and displayed by a controller, such as a console, on the network. When editing

these fields it will be necessary to delete or backspace over existing text and trailing spaces.

DHCP can be enabled or disabled. To edit the factory assigned address and mask, the user

must select Disabled. DHCP can then be enabled after editing, if desired. N

2's default is

ODE

Enabled, which works in most applications.

The IP Address and Subnet Mask can be edited here (provided DHCP is disabled). Doug

Fleenor Design recommends against altering the factory assigned values of 10.X.X.X and

255.0.0.0 (where X.X.X is unique).

If the user changes the IP address to 10.X.X.X, the subnet mask should be 255.0.0.0.

If the user changes the IP address to 192.168.X.X, the subnet mask should be 255.255.0.0.

Note that in the graphic above, DHCP has assigned its own address and mask.

Page 8 of 10