- ページ 4

録音機器 Doug Fleenor Design RERUN-R3のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Doug Fleenor Design RERUN-R3 12 ページ。 Rackmount dmx512 recorder

REMOTE SHOW RECALL PANEL

Remote control of the Rerun Rackmount system is accomplished by use of a Preset 10 Architectural

(model PRE10-A) panel. The remote panel provides ten show buttons and twelve indicators (Figure 1).

Multiple remote panels can be connected in a daisy chain manner to the DMX512 input on the Rerun

Rackmount.

NOTE: Remote panels must be wired to the DMX512 Universe 1 INPUT connector on the Rerun.

The remote panel must be configured as a remote station. Remove the jumpers located at JP2 and JP4

to configure a Preset 10 Architectural as a remote station (Figure 2). Place the jumper over only one of

the pins at JP2 and JP4 for storage.

(Figure 2)

(Figure 1)

Page 4 of 12