- ページ 13

防犯カメラ Dahua DのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Dahua D 18 ページ。 Hdcvi eyeball camera
Dahua D にも：ユーザーマニュアル (19 ページ)

Figure 3-5

Step 1

Rotate the enclosure to align the arrow on the enclosure edge with the arrow on the pedestal

edge; press inward according to the arrow location of the enclosure and meanwhile push

outward according to the arrow location of the pedestal to separate the concave; pull the

enclosure to make it break away from the pedestal.

Step 2

Confirm the installation location and dig holes on the installation surface.

Step 3

Use tools to insert expansion bolts into the installation holes and fix them firmly.

Step 4

Adjust pedestal location (if it is side cable outlet, then pull the cable through the side outlet

cable slot). Align the bolt fixing holes of the device pedestal with the expansion bolt fixing holes

of the installation surface; insert the self-tapping screws into the expansion bolts and fasten

them firmly to fix the pedestal on the installation surface (if it is top outlet, pull the cable

through the outlet hole on the installation surface after the pedestal is fixed firmly).

Step 5

Make the enclosure buckle get stuck into the pedestal, rotate the enclosure and dome body to

a proper monitoring location.

So far the device installation and cable connection are completed; you can check the image

via back-end coding device.

Model E