- ページ 11
コントロールユニット Doug Fleenor Design Preset12のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Doug Fleenor Design Preset12 11 ページ。
ページを印刷する
To Enter Set Up
Remove power.
Press firmly and hold buttons 1 and 7.
Apply power.
Release buttons. LEDs will chase to confirm set up mode.
To Set Preset12 to Factory Defaults
Press 12 then press 7. This does not erase the presets.
To Set Predefined Grouping Options (Factory default is all in the same group)
Press 1 then:
Press 1 to set all presets to the same group (Original Preset 10 functionality).
Press 2 to set all presets to their own group (Original P.O.P.O functionality).
Press 3 to group presets 1-6 together and, 7-12 together (two sets of radio buttons).
Press 4 to make 1-6 independent (each alone in its group), and 7-12 grouped together.
To Set an "ALL-OFF" Button (Factory default is button 12 is all-off)
Press 1, then press 12, then press the button to be an all-off preset.
To Set All Fade Times the Same (Factory default is two seconds)
Press 2 then enter a two digit fade time (use button 10 for zero).
To Lock/Unlock All Presets (Factory default is all unlocked)
Press 3 then:
Press 1 to unlock all presets (any preset can be recorded at any time).
Press 2 to lock presets if DMX512 is absent (only recordable from external DMX512 source).
Press 3 to lock presets if DMX512 is present (only recordable from other Preset12 presets).
Press 4 to lock all presets (presets must be unlocked here in set up before they can be altered).
To Select Main/Remote Operation (Factory default is stand-alone)
Press 6 then:
Press 1 if this is the only Preset12 in the system (stand-alone mode).
Press 2 if this is a Main station with Remote station(s) in the system.
Press 3 if this is a Remote station which will remotely control the Main station.
To Create A Custom Preset Group
Press 7 then:
Press the first preset in the group.
Press other presets in the group.
Press the first preset in the group again; this ends this group.
To Set the Fade Time For A Single Preset
Press 8 then:
Press the chosen preset.
Enter a two digit fade time (use button 10 for zero).
To Lock/Unlock a Single Preset
Press 9 then:
Press the chosen preset, then:
Press 1 to unlock this preset (this preset can be recorded at any time).
Press 2 to lock this preset if DMX512 is absent (only recordable from external DMX512 source).
Press 3 to lock this preset if DMX512 is present (only recordable from other Preset12 presets).
Press 4 to lock this preset (preset must be unlocked here, in set up, before it can be altered).
To Select Loss-Of-DMX behavior (Factory default is fade to Preset12's last look)
Press 12 then:
Press 1 to hold the external DMX512 look upon loss of the external source.
Press 2 to fade to the most recent Preset12 look upon loss of the external DMX512 source.
To Exit Set Up
Cycle power or Press 12 then Press 12 again.
Preset12 Cheat Sheet
Page 11 of 11