- ページ 3

自動車アクセサリー Doug Thorley Headers THY-464-1のPDF 使用方法をオンラインで閲覧またはダウンロードできます。Doug Thorley Headers THY-464-1 5 ページ。 Nissan v6 86-89 hard body, pathfinder pickups

ページを印刷する

INSTALLATION PROCEDURES

WARNING! - Do not rely on bumper jacks or chassis jacks for support during header installa-

tion. The subject vehicle should be raised and supported with jacking equipment and

jackstands or ramps intended for undercarriage auto maintenance. It is extremely dangerous to

work under an improperly raised and/or supported vehicle.

WARNING! - Make certain there is ample clearance around components such as brake lines,

brake proportioning valves, fuel lines, hoses and pumps, and electrical components and wires.

In some cases it may be necessary to relocate items that may be adversely affected by exhaust

system heat.

NOTE: These procedures are documented on factory standard-equipped vehicles with original

configuration compliance. Any modification of the subject vehicle may dictate modification to

these procedures.

1) Disconnect the battery.

2) Raise the front of the vehicle approximately 24 inches and support it with jack stands or

other suitable supports. (WARNING! - Do not rely on bumper jacks or chassis jacks for

support during header installation. The subject vehicle should be raised and supported with

jacking equipment and jackstands or ramps intended for undercarriage auto maintenance.

It is extremely dangerous to work under an improperly raised and/or supported vehicle.)

3) Remove the front wheels.

4) Remove the rubber mud shields from the wheel wells.

5) Remove the brake line heat shield from the passenger side.

6) Disconnect the emission control lines from the stock exhaust manifold (pulse air, EGR,

oxygen sensor, etc.).

7) Remove the hot air pickup and the air cleaner.

8) Remove the two head pipes leading from the exhaust manifolds to the catalytic converter.

9) Remove the stock exhaust manifolds.

THY-464-1

NISSAN V6

86-89 HARD BODY,

PATHFINDER PICKUPS